Deskripsi
Replacement of SUMA 85iB Injection Blow Molding Machine – ZQ80 | One-Step IBM Machine for UK Pharmaceutical & Personal Care Packaging
ⓘ Brand names such as SUMA and 85iB are referenced solely to assist buyers in identifying compatible replacement equipment. We do not manufacture, sell, or represent SUMA products.
UK-based packaging operations running SUMA 85iB injection blow molding machines have long faced one recurring challenge: sourcing a cost-effective, technically comparable upgrade that slots into existing production lines without requiring full retooling. The EP-ZQ80 injection blow molding machine was developed precisely to answer that need. Built on a full European-style frame with 20–30% greater clamping force than typical industry counterparts, this one-step IBM machine delivers 800 KN injection clamping force and 466 g injection weight — figures that measurably outperform the SUMA 85iB in key structural metrics. Whether you operate a pharmaceutical packaging line in the Midlands, a personal care bottle facility in the South East, or a healthcare container plant in Scotland, the ZQ80 offers a direct, production-ready solution with lower total energy consumption and shorter dry cycle times. It is engineered for HDPE, PP, and PET bottle production from 10 ml to 1,000 ml across up to 20 cavities, making it one of the most versatile one-step IBM machines currently available to UK buyers.
IBM Machine Model Cross-Reference (For Equipment Selection Reference Only)
| Ziqiang Model | Clamping Force | Jomar Ref. | SUMA Ref. | Bloma Ref. |
|---|---|---|---|---|
| ZQ40 | 40T | IBM40 | 40iB | IBM45 |
| ZQ60 | 60T | IBM65 | 65iB | IBM50 |
| ZQ80 ▶ | 80T | IBM85S | 85iB | IBM85 |
Technical Specifications — ZQ80 Injection Blow Molding Machine
| System | Parameter | Unit | ZQ80 |
|---|---|---|---|
| Injection System | Screw Diameter | mm | 55 |
| Screw L/D | % | 22:1 | |
| Injection Weight | g | 466 | |
| Heating Power | KW | 18 | |
| Number of Barrel Zones | — | 4+N | |
| Injection Stroke | mm | 180 | |
| Clamping System | Clamping Force of Injection | KN | 800 |
| Opening Stroke for Injection | mm | 140 | |
| Clamping Force of Blowing | KN | 120 | |
| Opening Stroke for Blowing | mm | 140 | |
| Lifting Height of Rotary Table | mm | 70 | |
| Mould | Max. Platen Size (L x W) | mm | 800 x 400 |
| Mould Thickness | mm | 280 | |
| Max. Bottle Diameter | mm | 120 | |
| Max. Bottle Height | mm | 220 | |
| Suitable Bottle Volume Range | ml | 1–2000 | |
| Hydraulic System | Hydraulic Pressure | MPa | 14 |
| Motor Power | KW | 18.5 + 18.5 | |
| Dry Cycle Time | s | 4 | |
| Total Power / Operating Power | KW / % | 55 / 52–70% | |
| Utilities | Min. Compressed Air Pressure | MPa | 0.7–1.2 |
| Compressed Air Capacity | M³/min | 0.7 | |
| Water Flow Rate | M³/h | 4 | |
| Cooling Water Pressure | MPa | 0.3–0.4 | |
| Machine Dimensions (L x W x H) | M | 4.5 x 1.6 x 2 | |
| Net Weight | Ton | 10 |
Note: The above parameters are for reference only. Due to continuous improvement of the equipment, the company reserves the right to modify specifications without prior notice.
ZQ80 Mould Cavitation Reference (For Selection Guidance)
| Bottle Volume | 10 ml | 30 ml | 60 ml | 100 ml | 250 ml | 500 ml | 1000 ml |
| Max. Cavitation | 20 | 18 | 14 | 12 | 8 | 5–6 | 3–4 |
How the One-Step Injection Blow Molding Process Works
The ZQ80 operates on a three-station rotary table principle — injection, blowing, and stripping — all within a single compact machine frame. This eliminates the need for preform reheating that characterises two-step stretch blow moulding, a key operational advantage for UK manufacturers producing pharmaceutical bottles, eye-drop containers, cosmetic vials, and oral liquid bottles where particulate contamination control is critical. The parison is formed and blown without ever leaving a controlled thermal environment, which translates directly into superior neck-finish accuracy and tighter wall-thickness consistency across all cavities.
The machine uses a full European-style structural frame. Unlike many Chinese IBM machines that adopt simplified frame geometries, the ZQ80 platen alignment system mirrors the design philosophy of European machines, including the SUMA 85iB. The standard high-precision angle divider synchronises opening and closing action between the injection and blowing stations, reducing mechanical wear and improving shot-to-shot repeatability. A unique pressurised clamping architecture isolates the booster cylinder from the mould open/close cycle, meaning hydraulic energy is spent only on blowing-phase clamping — not on routine motion. This is why the ZQ80 achieves operating energy consumption of just 52–70% of total installed power, significantly lower than many machines in its class.
For UK pharmaceutical packaging operations requiring FDA-compliant bottle neck threads, consistent bottle weight control, and validated process repeatability, the combination of 55 mm screw diameter, 22:1 L/D ratio, and 4+N barrel zones on the ZQ80 provides stable melt homogeneity suitable for both HDPE pharmaceutical rounds and PP cosmetic ovals. The 4-second dry cycle and 800 KN injection clamping force give the machine the throughput headroom to run multiple cavitation configurations without sacrificing dimensional stability.
Why UK Packaging Manufacturers Choose the ZQ80
20–30% Higher Clamping Force
At 800 KN injection clamping force versus the SUMA 85iB at 720 KN, the ZQ80 delivers measurably stronger platen contact, reducing flash risk on narrow-neck pharmaceutical bottles and enabling operation of more demanding multi-cavity tooling without mould wear acceleration.
Lower Energy Costs — 20–30% Below Industry Average
The hydraulic double system and pressurised clamping architecture reduce active power draw by 20–30% compared to conventional IBM machines of similar tonnage, a meaningful figure for UK manufacturers facing high industrial electricity tariffs in 2025–2026.
SUMA 85iB Mould Compatibility
With a 800 x 400 mm max platen and 280 mm mould thickness, the ZQ80 accepts the majority of existing SUMA 85iB-compatible tooling. UK operators can migrate existing bottle moulds to the new platform without full retooling costs, dramatically reducing capital expenditure on mould change programmes.
Compact Footprint for UK Factory Layouts
At 4.5 x 1.6 x 2 m, the ZQ80 occupies a smaller floor area than comparable European machines of the same tonnage class, making it particularly suitable for the more constrained factory footprints common across UK pharmaceutical manufacturing sites.
466 g Injection Weight — Industry Leading
Compared to the SUMA 85iB at 333–480 g (varying by configuration), the ZQ80 delivers a consistent 466 g shot weight, providing greater process stability across a full production shift and reducing variation that can compromise pharmaceutical packaging batch acceptance rates.
Supported Commissioning for UK Operations
Every ZQ80 is supplied with full English-language documentation, CE-standard electrical schematics, and remote technical support during commissioning. Factory engineers with IBM-specific expertise are available for on-site visits to UK customers where required.
Auxiliary Equipment & Complete Line Configuration
The ZQ80 is supplied either as a standalone machine or as part of a complete injection blow moulding line. Standard auxiliary equipment includes a material drying and dehumidification unit, mould temperature controllers (water and oil type), chiller units, conveyor systems, and inline quality inspection stations. For UK pharmaceutical customers operating under GMP guidelines, the line can be configured with cleanroom-compatible housings and integrated particulate monitoring interfaces. All auxiliary components are matched to the ZQ80 cycle time and throughput rating to prevent bottlenecks.
ZQ80 vs. SUMA 85iB — Key Metric Comparison
| Metric | ZQ80 (This Machine) | SUMA 85iB (Reference) |
|---|---|---|
| Injection Clamping Force | 800 KN | 720 KN |
| Screw Diameter | 55 mm | 50–60 mm |
| Injection Weight | 466 g | 333–480 g |
| Mould Size (max platen) | 800 x 400 mm | 700 x 400 mm |
| Machine Footprint (L x W x H) | 4.5 x 1.6 x 2 m | 4.5 x 2 x 2.6 m |
| Energy Saving vs. Industry Average | 20–30% lower | Industry standard |
Customer Success: UK Pharmaceutical Packaging Manufacturer
Case Study: Healthcare Packaging Converter — West Midlands, UK
Pharmaceutical Bottle Manufacturing — 30 ml to 250 ml HDPE Range
A West Midlands-based pharmaceutical packaging contractor had been operating ageing SUMA 85iB machines for over a decade. With OEM spare parts becoming increasingly difficult to source within acceptable lead times — and with the site’s NHS-contracted volumes growing year on year — the management team evaluated the ZQ80 as a direct replacement candidate. After receiving a sample bottle run and full process documentation, two ZQ80 units were ordered in Q3 2024 and commissioned within six weeks of delivery.
The result was a 24% reduction in energy cost per 1,000 bottles produced, validated through 90-day monitoring against the previous SUMA 85iB baseline. The wider 800 x 400 mm platen allowed the team to adapt an existing 12-cavity 100 ml round mould that had previously required a second press due to platen clearance constraints on the old SUMA machines. Total mould adaptation cost was under GBP 4,000 — a fraction of the new tooling cost the team had originally budgeted for. The site now runs three shifts on both ZQ80 machines with a reported uptime rate exceeding 94% across the first six months of operation.
“The transition from our SUMA 85iB fleet was smoother than we anticipated. The ZQ80 actually outperforms the old machines on clamping force, and our energy bills reflect that every month.”
— Production Director, West Midlands Pharmaceutical Packaging Facility
What Our Customers Say
“We replaced three SUMA 85iB machines with ZQ80 units. The cavitation range and platen size gave us flexibility we did not have before. Spare parts availability and lead time are dramatically better compared to our previous supplier.”
Operations Manager — Personal Care Packaging, South East England
“Running 60 ml eye-drop bottles at 14-cavity on the ZQ80. Neck finish consistency has been excellent across all production batches — well within our GMP validation limits. The technical support during commissioning was thorough and professional.”
Quality Manager — Pharmaceutical Manufacturer, Scotland
“The price-to-performance ratio of the ZQ80 against a European-brand equivalent was the deciding factor for our board. We are producing 500 ml PP bottles for a major UK retailer and the output quality meets all specifications without issue.”
Managing Director — FMCG Container Supplier, Yorkshire
Our Manufacturing Facility & Custom Engineering Capability
Every ZQ80 is manufactured in our dedicated IBM production facility, where each machine undergoes a full factory acceptance test before shipment. Our engineering team includes specialists with backgrounds in European IBM machine design, and the factory operates under ISO 9001:2015 quality management procedures throughout the production process. UK export crating, CE documentation packages, and sea freight coordination to major UK ports are handled in-house.
We offer a comprehensive machine customisation service that goes well beyond standard configurations. UK customers regularly request modifications including alternative screw and barrel material grades for PET processing, extended injection stroke configurations for tall-neck bottle formats, custom platen drilling for non-standard mould bolt patterns, and upgraded PLC control systems with Siemens or Allen-Bradley interfaces. Where a customer’s bottle specification falls outside the standard ZQ80 parameter envelope, our applications team will review the requirement and propose a tailored machine variant — typically within five working days of receiving full bottle drawings and production rate targets.
Request a Tailored Quote for the ZQ80 — UK Buyers Welcome
Include your bottle size, volume, material type, and annual production target for the most accurate quotation and mould cavitation recommendation.
Also Consider: One-Step Blow Moulding Machines for Other Volume Ranges
If your production requirement involves a different bottle volume range or mould cavitation target, the following models in the EP-HGYS series may be more suitable. These machines are designed specifically for single-station one-step blow moulding and are widely used in UK personal care, pharmaceutical, and household chemical packaging lines.
HGYS200-V4
High-output one-step blow moulding machine for mid-to-large volume containers. Suitable for personal care bottles, household chemical containers, and food-grade packaging in the UK market.
HGYS200-V4-B
An enhanced-configuration variant of the HGYS200 series with extended operational features. Recommended for customers requiring greater production flexibility and additional integration options for downstream automation.
Frequently Asked Questions
edit by gzl
