Description
EP-ZQ Series · Injection Blow Molding Machine
ZQ60 Injection Blow Molding Machine
Replacement Reference for Jomar IBM65 · Supplied to UK Manufacturers
⚠ Brand names mentioned are for reference only to assist machine selection. We do not manufacture or sell Jomar-branded products.
The EP ZQ60 injection blow molding machine is a high-performance, full-European-structure IBM system designed to replace or upgrade aging Jomar IBM65 lines operating across UK pharmaceutical, personal care, and food-grade packaging facilities. Engineered with a unique pressurised clamping mechanism and servo-driven rotary table, the ZQ60 delivers production-line reliability with energy savings of 10–20% versus comparable machines in the same class. Its 60-tonne clamping force and expanded injection weight capacity make it a compelling choice for British manufacturers seeking to modernise their injection blow molding operations without extensive tooling changes or extended downtime.
Why UK Manufacturers Choose the ZQ60
20–30% Higher Clamping Force
Full European-style structure provides 600 KN injection clamping force, outperforming comparable machines in the same category — giving you better mould control and reduced flash on precision parts.
10–20% Energy Reduction
The unique pressurised booster clamping cylinder is decoupled from the mould open/close sequence. This means the hydraulic circuit is significantly less loaded during cycling, driving down operating energy by 10–20% versus industry norms.
Standard Servo Rotation
A servo-driven rotary table replaces traditional mechanical cam indexing, resulting in a simpler mechanical assembly, faster maintenance access, and noticeably quieter operation on the production floor.
Expanded Injection Capacity
With injection weights of 260 g and 383 g (depending on screw selection), the ZQ60 offers a meaningful capacity upgrade over the Jomar IBM65’s 205 g ceiling — accommodating heavier preforms and wider container neck diameters without compromising cycle time.
How the ZQ60 Injection Blow Molding Machine Works
The injection blow molding process combines two stages within a single rotary platform. Molten resin — typically HDPE, PP, or PET — is injected around a core rod to form a precise parison in the injection station. The rotary table then indexes 120 degrees, positioning the parison inside the blow mould. Compressed air at 0.7–1.2 MPa is introduced through the core rod, expanding the parison against the mould wall to form the finished container. The completed bottle is then ejected at the third station during the same machine cycle. This integrated, one-step approach eliminates the need for separate preform handling, reducing contamination risk — a critical advantage in UK pharmaceutical and personal care manufacturing where GMP traceability is mandatory.
The ZQ60 is well-suited to container volumes from 1 ml to 2,000 ml, covering a broad range of packaging needs. Typical applications in the UK market include dropper bottles for eye and ear medications, narrow-neck bottles for personal care serums, food-safe HDPE containers for condiments, and cosmetic packaging for prestige brands. The machine’s full European structural framework means mould dimensions follow widely adopted European standards, making tooling sourcing and mould manufacture straightforward for British toolmakers.
Sample containers produced by the ZQ60 injection blow molding machine
Personal Care Packaging
Food-Grade HDPE Containers
Cosmetics & Serums
Nutraceutical Bottles
Household Chemical Bottles
Technical Specifications – ZQ60
* Parameters are for reference. Due to ongoing equipment improvement, the manufacturer reserves the right to modify specifications without notice.
ZQ60 Mould Cavitation Reference
Maximum available cavities per container volume — for planning purposes only:
ZQ60 vs. Industry Reference Models
Brand names are referenced for machine-selection guidance only. We supply the ZQ60 as an independent product.
* Third-party brand data cited for reference comparison only. Figures are approximate and subject to model variant. ZQ60 data verified by manufacturer.
Auxiliary Equipment & Complete Line Solutions
The ZQ60 injection blow molding machine integrates seamlessly into a complete production line. Standard auxiliary systems supplied alongside the main machine include raw material hopper dryers, temperature-controlled water chillers, compressed air treatment systems, and bottle conveyor outfeed units. For UK buyers operating under strict BRC or BFS standards, we can configure the line with enclosed conveyor systems and static eliminator modules, ensuring particulate control during the blow-off and ejection stages. Optional downstream integration points include in-line leak testers, checkweighers, labelling systems, and automated bin tippers — allowing you to build a lights-out bottling cell from a single source.
Client Success: UK Pharmaceutical Packaging Upgrade
Case Study · East Midlands, UK · Pharmaceutical Packaging
A mid-sized contract packaging business based in Nottingham had operated a Jomar IBM65 for eleven years producing 30 ml and 60 ml HDPE dropper bottles for ophthalmic and topical medication clients. The machine was approaching end-of-life, with increasing downtime related to worn hydraulic seals and an obsolete control board. Sourcing spare parts was taking six to eight weeks, causing supply chain delays for two major NHS-registered pharmaceutical clients.
After a technical review, the company installed a ZQ60 injection blow molding machine in Q3. The machine was fully operational within four days of delivery, using their existing core rods with minor adaptor tooling. Production efficiency improved by 18% thanks to the faster 4-second dry cycle, and the monthly electricity bill for the machine dropped by approximately 14% — confirmed by their facilities manager over a 90-day monitoring period. Their two pharmaceutical clients were informed of the equipment change and both completed re-qualification audits within six weeks, maintaining uninterrupted supply.
“The changeover was smoother than we expected. The technical support team was available throughout commissioning, and the machine’s output consistency has been excellent across the 30 ml dropper line.” — Production Manager, Nottingham
★★★★★
“We replaced our old IBM machine with the ZQ60 and immediately noticed the quieter operation and faster cycle. Our 100 ml bottle line runs 8 cavities without any issues. Very happy with the ROI.”
— Operations Director, personal care manufacturer, West Yorkshire
★★★★★
“The energy savings were real and measurable. We run the machine across two shifts and the lower operating power percentage makes a noticeable difference to our utility costs. The servo rotation indexing is very smooth.”
— Technical Manager, nutraceutical packaging, Surrey
★★★★★
“Getting spare parts for our old Jomar had become a real headache. The ZQ60 has straightforward hydraulics and the service documentation is thorough. We have not had a single unplanned stoppage in eight months of production.”
— Plant Engineer, food packaging company, Greater Manchester
Manufacturing Facility & Custom Configuration
Every ZQ60 is manufactured at our dedicated precision engineering facility, which spans over 12,000 m² and operates under a rigorous quality management system. The production floor houses CNC machining centres, coordinate measuring machines, and hydraulic test rigs — giving us end-to-end control over every critical component from the plasticising barrel to the rotary table bearing assembly. For UK buyers, all machines shipped to Great Britain comply with CE marking requirements and are prepared for documentation packs suitable for BS EN ISO records.
Customisation is a core part of our service. We routinely configure the ZQ60 for specific resin types — including medical-grade PP, BPA-free HDPE, and crystal-clear PET — with screw and barrel geometry matched to the rheological profile of the material. Mould temperature control circuit routing, platen drilling patterns, and operator panel layouts can all be tailored to site-specific requirements. For customers transitioning from Jomar IBM65 tooling, our engineering team will review your existing core rod and mould dimensions and advise on the most cost-effective adaptor path to get your current tooling running on the ZQ60 with minimal modification.
Related Injection Blow Molding Machines
If you need a different capacity range, our EP-HGYS series offers high-speed and high-volume variants for demanding UK production environments:
HGYS200-V4
High-efficiency 200T servo injection blow molding machine for demanding pharmaceutical and personal care production lines. Expanded platen and multi-cavity capability.
HGYS150-V4-EV
All-electric 150T injection blow molding machine delivering ultra-precise process control and the lowest possible energy footprint for cleanroom and pharmaceutical packaging applications.
Frequently Asked Questions
Questions UK buyers commonly ask when considering the ZQ60 injection blow molding machine
Ready to Upgrade Your Injection Blow Molding Line?
Speak to our UK project team about the ZQ60. We will assess your current setup and provide a no-obligation proposal.
Disclaimer: Brand names including Jomar, SUMA, Uniloy, and Bloma are referenced solely to assist customers in identifying compatible machine class equivalents. ISBM-Equipment.com is an independent manufacturer and does not manufacture, distribute, or claim affiliation with any third-party brand mentioned on this page. All trademarks remain the property of their respective owners.
edit by gzl
