{"id":1130,"date":"2026-07-23T05:48:34","date_gmt":"2026-07-23T05:48:34","guid":{"rendered":"https:\/\/isbm-equipment.com\/?post_type=product&p=1130"},"modified":"2026-07-23T08:53:18","modified_gmt":"2026-07-23T08:53:18","slug":"replacement-of-uniloy-uib-150-injection-blow-molding-machine-zq110","status":"publish","type":"product","link":"https:\/\/isbm-equipment.com\/vi\/san-pham\/replacement-of-uniloy-uib-150-injection-blow-molding-machine-zq110\/","title":{"rendered":"Replacement of Uniloy UIB 150 Injection Blow Molding Machine \u2013 ZQ110"},"content":{"rendered":"
\n
\n

Notice:<\/strong> References to Uniloy and UIB 150 on this page are made solely to help existing Uniloy users identify a technically compatible replacement machine. Uniloy is a registered trademark of Uniloy Milacron LLC. We do not distribute, service, or represent Uniloy products in any capacity.<\/p>\n<\/div>\n

<\/p>\n

\n
<\/div>\n
Injection Blow Molding<\/span><\/div>\n

Replacement of Uniloy UIB 150 Injection Blow Molding Machine<\/h2>\n

ZQ110 \u2013 European-Standard All-Electric Hydraulic IBM<\/p>\n

Serving UK pharmaceutical, cosmetic and personal care manufacturers<\/p>\n<\/div>\n

<\/p>\n

\n

\"ISBMThe ZQ110 injection blow molding machine is engineered for manufacturers across the United Kingdom who are evaluating a direct, technically compatible replacement for the Uniloy UIB 150 injection blow molding machine. Designed around a full European-style structural framework, the ZQ110 brings a clamping force approximately 20\u201330% higher than industry-standard machines in the same class, achieving reliable, repeatable production of bottles and containers ranging from 1 ml up to 2,000 ml. Whether your facility in Manchester, Birmingham or Glasgow is scaling a pharmaceutical bottle line or running a high-volume cosmetic container programme, this injection blow molding machine delivers the output consistency and mechanical longevity UK buyers expect from capital equipment.<\/p>\n

The ZQ110 was designed from the ground up to address the most common operational pain points reported by Uniloy UIB 150 users: energy overheads, mould changeover time, and hydraulic complexity. A unique pressurised clamping structure means the booster cylinder plays no part in the opening and closing cycle, which cuts energy consumption by 20\u201330% versus comparable machines. A standard high-precision angle divider synchronises both opening\/closing mode and turret lifting in a single servo-controlled motion \u2014 reducing mechanical variability and trimming dry cycle time to four seconds. The result is an injection blow molding machine that is faster, quieter, and cheaper to operate than the equipment it replaces.<\/p>\n<\/div>\n

\n

Get a Quote \u2013 ZQ110<\/a><\/p>\n

Response within 1 business day \u00b7 UK export documentation available<\/p>\n<\/div>\n

<\/p>\n

\n

Why Choose the ZQ110 Over the Uniloy UIB 150<\/h2>\n

After years of fielding enquiries from UK and European plastic packaging plants that need to replace or upgrade their Uniloy UIB 150 injection blow molding machines, our engineering team identified five decisive factors that buyers consistently rate as non-negotiable. The ZQ110 was refined specifically to address each one.<\/p>\n

\n
\n
+<\/span><\/div>\n

20\u201330% Higher Clamping Force<\/h3>\n

Full European-style structure delivers a clamping force measurably above machines in the same tonnage class. Injection clamping reaches 1,100 kN; blow clamping holds at 150 kN \u2014 giving you far less flash and superior neck-finish definition.<\/p>\n<\/div>\n

\n
\u26a1<\/span><\/div>\n

20\u201330% Lower Energy Consumption<\/h3>\n

The unique pressurised clamping structure keeps the booster cylinder out of the opening and closing cycle entirely. Paired with a hydraulic double system as standard, operating power sits at just 52\u201370% of rated capacity during production.<\/p>\n<\/div>\n

\n
\u21bb<\/span><\/div>\n

4-Second Dry Cycle<\/h3>\n

High-precision angle divider synchronises turret lifting and mould open\/close as one seamless servo action, trimming the dry cycle to four seconds. On a 24-cavity mould running 10 ml containers, that adds up to a meaningful OEE gain across each shift.<\/p>\n<\/div>\n

\n
\u2692<\/span><\/div>\n

Wide Container Range: 1\u20132,000 ml<\/h3>\n

From 1 ml pharmaceutical vials to 2,000 ml household cleaning bottles, the ZQ110 handles a broader container portfolio on a single platform \u2014 cutting the need for multiple purpose-built machines across your UK production floor.<\/p>\n<\/div>\n

\n
\ud83d\udee0<\/span><\/div>\n

Compact Footprint vs UIB 150<\/h3>\n

Machine dimensions of 5 x 1.8 x 2.2 m compare favourably against the UIB 150’s 5 x 2.4 x 2.7 m envelope. That width and height reduction matters when integrating into existing UK packaging halls with restricted overhead clearance.<\/p>\n<\/div>\n

\n
\u2605<\/span><\/div>\n

Mould Compatibility & Customisation<\/h3>\n

Max platen size of 1,100 x 460 mm accommodates tooling families from 6-cavity (1,000 ml) up to 24-cavity (10 ml). Custom mould development and bespoke neck-finish tooling is available through our in-house design team.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Technical Specifications \u2013 ZQ110<\/h2>\n

All parameters are for reference only. As the equipment is continuously improved, the company reserves the right to modify specifications without prior notice.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
System<\/th>\nParameter<\/th>\nUnit<\/th>\nZQ110<\/th>\n<\/tr>\n<\/thead>\n
INJECTION SYSTEM<\/td>\n<\/tr>\n
<\/td>\nScrew Diameter<\/td>\nmm<\/td>\n65<\/td>\n<\/tr>\n
<\/td>\nScrew L\/D<\/td>\n%<\/td>\n22:1<\/td>\n<\/tr>\n
<\/td>\nInjection Weight<\/td>\ng<\/td>\n540<\/td>\n<\/tr>\n
<\/td>\nHeating Power<\/td>\nkW<\/td>\n20<\/td>\n<\/tr>\n
<\/td>\nNumber of Barrel Zones<\/td>\n\u2013<\/td>\n5+N<\/td>\n<\/tr>\n
<\/td>\nInjection Stroke<\/td>\nmm<\/td>\n200<\/td>\n<\/tr>\n
CLAMPING SYSTEM<\/td>\n<\/tr>\n
<\/td>\nClamping Force (Injection)<\/td>\nkN<\/td>\n1,100<\/td>\n<\/tr>\n
<\/td>\nOpening Stroke for Injection<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
<\/td>\nClamping Force (Blowing)<\/td>\nkN<\/td>\n150<\/td>\n<\/tr>\n
<\/td>\nOpening Stroke for Blowing<\/td>\nmm<\/td>\n140<\/td>\n<\/tr>\n
<\/td>\nLifting Height of Rotary Table<\/td>\nmm<\/td>\n70<\/td>\n<\/tr>\n
MOULD<\/td>\n<\/tr>\n
<\/td>\nMax. Platen Size (L x W)<\/td>\nmm<\/td>\n1,100 x 460<\/td>\n<\/tr>\n
<\/td>\nMould Thickness<\/td>\nmm<\/td>\n280<\/td>\n<\/tr>\n
<\/td>\nMax. Bottle Diameter<\/td>\nmm<\/td>\n120<\/td>\n<\/tr>\n
<\/td>\nMax. Bottle Height<\/td>\nmm<\/td>\n220<\/td>\n<\/tr>\n
<\/td>\nSuitable Bottle Volume<\/td>\nml<\/td>\n1 \u2013 2,000<\/td>\n<\/tr>\n
<\/td>\nStripping Stroke<\/td>\nmm<\/td>\n260<\/td>\n<\/tr>\n
HYDRAULIC SYSTEM<\/td>\n<\/tr>\n
<\/td>\nHydraulic Pressure<\/td>\nMPa<\/td>\n14<\/td>\n<\/tr>\n
<\/td>\nMotor Power<\/td>\nkW<\/td>\n22 + 22<\/td>\n<\/tr>\n
<\/td>\nDry Cycle<\/td>\ns<\/td>\n4<\/td>\n<\/tr>\n
<\/td>\nTotal Power<\/td>\nkW<\/td>\n80<\/td>\n<\/tr>\n
<\/td>\nOperating Power<\/td>\n%<\/td>\n52 \u2013 70<\/td>\n<\/tr>\n
OTHER PARAMETERS<\/td>\n<\/tr>\n
<\/td>\nMin. Compressed Air Pressure<\/td>\nMPa<\/td>\n0.7 \u2013 1.2<\/td>\n<\/tr>\n
<\/td>\nCompressed Air Capacity<\/td>\nm3\/min<\/td>\n0.7<\/td>\n<\/tr>\n
<\/td>\nWater Flow Rate<\/td>\nm3\/h<\/td>\n4<\/td>\n<\/tr>\n
<\/td>\nCooling Water Pressure<\/td>\nMPa<\/td>\n0.3 \u2013 0.4<\/td>\n<\/tr>\n
<\/td>\nMachine Dimensions (L x W x H)<\/td>\nm<\/td>\n5 x 1.8 x 2.2<\/td>\n<\/tr>\n
<\/td>\nNet Weight<\/td>\nTon<\/td>\n15<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Mould Cavitation Reference \u2013 ZQ110<\/h2>\n

For reference only. Actual cavitation depends on container geometry and neck finish.<\/p>\n

\n\n\n\n\n\n
Approx. Container Volume<\/th>\n10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1,000 ml<\/th>\n<\/tr>\n<\/thead>\n
Max. Cavitation<\/td>\n24<\/td>\n22<\/td>\n18<\/td>\n14<\/td>\n10<\/td>\n8<\/td>\n6<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

<\/p>\n

\n

ZQ110 vs. Uniloy UIB 150 \u2013 Direct Comparison<\/h2>\n

The table below provides a direct parameter comparison between the ZQ110 and the Uniloy UIB 150. This information is intended solely to help existing Uniloy users identify a compatible replacement machine. Uniloy is a trademark of Uniloy Milacron LLC; we do not distribute Uniloy equipment.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nZQ110 (Our Model)<\/th>\nUIB 150 (Uniloy)<\/th>\n<\/tr>\n<\/thead>\n
Clamping Force<\/td>\n1,100 kN (110T)<\/td>\n\u2013<\/td>\n<\/tr>\n
Screw Diameter<\/td>\n65 mm<\/td>\n65 \/ 76 mm<\/td>\n<\/tr>\n
Injection Weight<\/td>\n540 g<\/td>\n580 \/ 770 g<\/td>\n<\/tr>\n
Mould Size (Platen)<\/td>\n1,100 x 460 mm<\/td>\n1,000 x 500 mm<\/td>\n<\/tr>\n
Machine Dimensions<\/td>\n5 x 1.8 x 2.2 m<\/td>\n5 x 2.4 x 2.7 m<\/td>\n<\/tr>\n
Net Weight<\/td>\n15 Ton<\/td>\n\u2013<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

*Uniloy and UIB 150 are trademarks of Uniloy Milacron LLC. Data sourced from public catalogue references for comparison purposes only.<\/p>\n<\/div>\n

<\/p>\n

\n

How the ZQ110 Injection Blow Molding Machine Works<\/h2>\n

The ZQ110 operates on the single-station injection blow molding principle, integrating the injection, blowing, and stripping stages onto one rotating turret. In the injection phase, HDPE, LDPE, PP, or PET resin is plasticised by the 65 mm diameter screw \u2014 running at a 22:1 L\/D ratio \u2014 and injected into the preform mould at up to 540 g per shot. The resin fills around a stainless-steel core pin, forming a precise parison whose wall distribution is controlled by carefully tuned injection speed and pressure profiles within the five-zone barrel.<\/p>\n

Once the preform is formed, the turret indexes through 120 degrees to the blow station, where compressed air at 0.7\u20131.2 MPa expands the hot parison against the cooled blow cavity walls. The unique pressurised clamping structure holds the blow mould at 150 kN without engaging the booster cylinder \u2014 an important distinction that both reduces hydraulic duty cycles and cuts overall energy draw by up to 30%. After a controlled cooling dwell, the turret advances to the stripping station where finished containers are ejected onto the take-away conveyor, ready for downstream filling and labelling in your UK facility.<\/p>\n

\n
\n

Stage 1<\/p>\n

Injection<\/p>\n

Resin plasticised and injected around core pins to form preforms at up to 540 g per shot.<\/p>\n<\/div>\n

\n

Stage 2<\/p>\n

Blowing<\/p>\n

Compressed air expands the parison to final container shape with 150 kN blow clamping force.<\/p>\n<\/div>\n

\n

Stage 3<\/p>\n

Stripping<\/p>\n

Finished containers ejected cleanly at 260 mm stripping stroke, flash-free and dimensionally consistent.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Auxiliary Equipment & Finished Containers<\/h2>\n

A complete injection blow molding production line extends well beyond the machine frame itself. The ZQ110 is designed to integrate cleanly with a standard range of auxiliary systems that UK manufacturers typically specify alongside capital blow moulding equipment. Chiller units maintain mould temperature to within 0.5 degrees Celsius across extended shifts, while hopper dryers and dehumidifying dryers ensure resin moisture is controlled to material supplier specification before the barrel. Take-away conveyors, bottle counters, and vision inspection cameras complete the downstream side of the line.<\/p>\n

\n
\n

\"Injection<\/p>\n

Standard auxiliary equipment package<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Container Samples Produced on the ZQ110<\/h2>\n

The machine handles the full range of container types demanded by UK pharmaceutical, nutraceutical, personal care and household goods manufacturers \u2014 from narrow-neck eye drop vials through to wide-mouth supplement tubs.<\/p>\n

\"Containers<\/p>\n

Sample containers produced on the ZQ110 platform \u2013 pharmaceutical, cosmetic and food-grade applications<\/p>\n<\/div>\n

<\/p>\n

\n

Client Success Story<\/h2>\n
\n
\n
Case Study<\/div>\n
\n

Northern Ireland Pharmaceutical Packaging Manufacturer<\/p>\n

Industry: Pharmaceutical & Nutraceutical Bottles | Location: Belfast, UK<\/p>\n<\/div>\n<\/div>\n

A contract packaging business based in Belfast had been operating two Uniloy UIB 150 injection blow molding machines for over a decade on a line producing HDPE pharmaceutical bottles at 60 ml and 100 ml. As spare parts lead times stretched and energy costs climbed sharply, management began evaluating replacement options that could maintain existing tooling compatibility while cutting running costs. Following a detailed site survey by our technical team, two ZQ110 machines were installed alongside a chiller and hopper dryer upgrade.<\/p>\n

Within the first month of production, the customer recorded a 26% reduction in electricity consumption per thousand bottles compared with the previous machines. The 4-second dry cycle and the synchronised turret-lifting system allowed the line to run at a higher effective throughput even though nominal machine speed appeared similar on paper. The engineer responsible for the project noted that mould changeover \u2014 a consistent bottleneck under the previous setup \u2014 dropped from approximately 90 minutes to under 40 minutes on the ZQ110, attributed largely to the improved platen access and the standardised hydraulic connection layout.<\/p>\n

\"IBM<\/p>\n

 <\/p>\n

\n
\n

26%<\/p>\n

Energy Cost Reduction<\/p>\n<\/div>\n

\n

55%<\/p>\n

Faster Mould Changeover<\/p>\n<\/div>\n

\n

2<\/p>\n

ZQ110 Machines Installed<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

What Our Customers Say<\/h2>\n
\n
\n
\u2605\u2605\u2605\u2605\u2605<\/span><\/div>\n

“We replaced our ageing blow moulders with two ZQ110 machines last year. The energy savings alone covered a significant portion of the payback we needed, and the machines have run consistently without any unplanned downtime in eight months of production.”<\/p>\n

\n

Operations Director<\/p>\n

Pharmaceutical Packaging Company, Belfast, UK<\/p>\n<\/div>\n<\/div>\n

\n
\u2605\u2605\u2605\u2605\u2605<\/span><\/div>\n

“The technical support team was excellent throughout the commissioning process. The ZQ110 was running qualified containers within two days of installation, which was well ahead of the timeline we had budgeted for. The engineering specifications were exactly as described.”<\/p>\n

\n

Production Manager<\/p>\n

Personal Care Contract Manufacturer, West Midlands, UK<\/p>\n<\/div>\n<\/div>\n

\n
\u2605\u2605\u2605\u2605\u2605<\/span><\/div>\n

“We needed a machine that could handle both 30 ml and 250 ml containers on the same platform without long changeover delays. The ZQ110 does exactly that. The wider platen size compared to our previous machine means we have room to run higher-cavitation tooling when volume demands increase.”<\/p>\n

\n

Tooling & Process Engineer<\/p>\n

Nutraceutical Bottle Manufacturer, Manchester, UK<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Manufacturing Capability & Custom Configurations<\/h2>\n

Our injection blow molding machines are built in a purpose-designed manufacturing facility where structural components, hydraulic circuits, and electrical control assemblies are fabricated and tested under one roof. The factory is equipped with precision CNC machining centres, co-ordinate measuring machines, and hydraulic test rigs capable of validating complete machine assemblies before shipment. Every ZQ110 dispatched to a UK customer undergoes a full dry-cycle acceptance test, hydraulic pressure verification, and a production run on representative tooling before leaving the facility.<\/p>\n

Custom configurations are a core part of our offering rather than an afterthought. If your production programme involves neck finishes, container geometry, or resin grades that fall outside the standard ZQ110 envelope, our applications engineering team will work through the specification with you. We can modify screw geometry for specific resin families, adjust platen dimensions for non-standard tooling, configure the control system to integrate with your existing factory SCADA, or supply the machine with a purpose-built mould and auxiliary equipment package ready for plug-in commissioning. UK buyers can request a dedicated project manager who will co-ordinate delivery, installation, and operator training from a single point of contact.<\/p>\n

\"Injection\"IBM\"ZQ110<\/div>\n
Get a Quote for Your Custom Configuration<\/a><\/div>\n<\/div>\n

<\/p>\n

\n

Related Injection Blow Molding Machine Models<\/h2>\n

Buyers evaluating the ZQ110 as a Uniloy UIB 150 replacement sometimes also consider closely related ZQ-series models. The links below lead to detailed product pages for two additional options that share the same European-style frame architecture and are available in configurations compatible with other established IBM platforms:<\/p>\n

\n

ZQ110 Series<\/p>\n

Replacement of SUMA 135iB Injection Blow Molding Machine \u2013 ZQ110<\/p>\n

Designed for SUMA 135iB users seeking a direct, energy-efficient IBM replacement with European-standard clamping structure and high-cavitation mould compatibility.<\/p>\n

View Product \u2192<\/a><\/p>\n

 <\/p>\n

ZQ110 Series<\/p>\n

Replacement of Bloma IBM135 Injection Blow Molding Machine \u2013 ZQ110<\/p>\n

An engineered drop-in for Bloma IBM135 operations, maintaining container geometry and neck-finish accuracy while delivering improved throughput and lower operating power.<\/p>\n

View Product \u2192<\/a><\/p>\n

 <\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Frequently Asked Questions<\/h2>\n
\nWhat is the price or cost of a ZQ110 injection blow molding machine for a UK pharmaceutical bottle manufacturer, and how do I get a quote?+<\/span><\/summary>\n
Pricing for the ZQ110 depends on the specific configuration you need \u2014 cavitation, mould specification, auxiliary equipment package, and shipping destination within the UK. We do not publish a fixed list price because most orders include some degree of customisation. The fastest route to an accurate figure is to send your container dimensions, neck finish, output requirement, and resin grade to sales@isbm-equipment.com<\/a>. Our team will come back with a detailed cost breakdown normally within one working day.<\/div>\n<\/details>\n
\nHow does the ZQ110 injection blow molding machine compare to the Uniloy UIB 150 in terms of energy consumption and output capacity for a UK cosmetics packaging line?+<\/span><\/summary>\n
The ZQ110’s pressurised clamping system reduces energy consumption by 20\u201330% versus machines in the same class, which typically places it well below the UIB 150’s recorded running costs for UK operators. Operating power sits at 52\u201370% of the 80 kW rated total, meaning your actual electricity draw during production is considerably lower than the nameplate figure. In terms of output, the 4-second dry cycle and the synchronised angle divider for turret rotation allow the machine to sustain high effective throughput, particularly on 10\u201330 ml cosmetic containers where the 24-cavity maximum is a significant advantage.<\/div>\n<\/details>\n
\nWhich container materials and bottle sizes can the ZQ110 injection blow molding machine handle for nutraceutical and pharmaceutical applications in the United Kingdom?+<\/span><\/summary>\n
The ZQ110 processes HDPE, LDPE, PP, and certain grades of PET resin \u2014 all of which are routinely used in UK pharmaceutical, nutraceutical, personal care, and food supplement packaging. Container volumes from 1 ml up to 2,000 ml are supported within the same machine platform. Maximum bottle diameter is 120 mm and maximum bottle height is 220 mm. If your application involves a specialist resin grade or a particularly demanding neck finish, our applications team can assess compatibility and, where necessary, adjust screw geometry or barrel zoning to suit.<\/div>\n<\/details>\n
\nWhere can I find a reliable injection blow molding machine supplier in the UK that offers technical support and spare parts for a Uniloy UIB 150 replacement?+<\/span><\/summary>\n
We supply the ZQ110 to UK customers directly with full technical documentation in English, a dedicated commissioning engineer for installation, and an ongoing spare parts service. Common wear items \u2014 seals, screw tips, hydraulic components \u2014 are held in stock and can be dispatched to any UK mainland address. For customers who previously operated Uniloy UIB 150 machines, we maintain a cross-reference guide that maps UIB 150 service intervals and wear components to equivalent ZQ110 parts, which simplifies your transition to the new machine within your existing maintenance programme.<\/div>\n<\/details>\n
\nHow long does it take to receive a ZQ110 injection blow molding machine from order placement to installation at a UK manufacturing facility?+<\/span><\/summary>\n
Lead time from order confirmation to factory acceptance testing is typically 60\u201390 days for a standard ZQ110 configuration, with transit to UK ports adding approximately 3\u20135 weeks by sea freight. Customs clearance and in-plant delivery logistics depend on your site location, but our UK logistics co-ordinator can manage the full import and delivery process. Commissioning \u2014 including dry-cycle testing, hydraulic verification, and supervised production runs \u2014 normally takes 2\u20133 days on site once the machine is positioned and utilities are connected.<\/div>\n<\/details>\n
\nWhat custom mould and tooling options are available when ordering a ZQ110 injection blow molding machine for a high-volume UK personal care bottle production line?+<\/span><\/summary>\n
Custom tooling is handled through our in-house mould design team. We work from your container drawing or 3D file to design injection and blow tooling optimised for the ZQ110 platen dimensions \u2014 up to 1,100 x 460 mm \u2014 with cavitation selected to match your target output rate. Neck finish options cover the full range of standard PCO, GPI, and bespoke thread profiles used in UK cosmetics and personal care applications. If you are transferring existing Uniloy tooling, our engineers can assess whether adaptation or new tooling is the more cost-effective route for your specific container range.<\/div>\n<\/details>\n

<\/p>\n

\n
\n
<\/div>\n<\/div>\n
\n
<\/div>\n<\/div>\n
\n
<\/div>\n<\/div>\n
\n
<\/div>\n<\/div>\n
\n
<\/div>\n<\/div>\n
\n
<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Ready to Replace Your Uniloy UIB 150?<\/h2>\n

Send us your container specifications and current machine details. Our UK export team will come back with a tailored quotation, lead time, and technical comparison within one working day.<\/p>\n

Email Our Sales Team Now<\/a><\/p>\n

sales@isbm-equipment.com \u00b7 UK export documentation available \u00b7 CE-compatible configurations \u00b7 edit by gzl<\/p>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"

ZQ110 injection blow molding machine \u2014 direct Uniloy UIB 150 replacement. European-frame IBM: 1,100 kN clamp, 65 mm screw, 1\u20132,000 ml HDPE\/PP\/PET bottles, 24-cavity max, 20\u201330% lower energy. UK supply.<\/p>","protected":false},"featured_media":697,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[21],"product_tag":[],"class_list":["post-1130","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-equipment.com\/vi\/wp-json\/wp\/v2\/product\/1130","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-equipment.com\/vi\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-equipment.com\/vi\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-equipment.com\/vi\/wp-json\/wp\/v2\/media\/697"}],"wp:attachment":[{"href":"https:\/\/isbm-equipment.com\/vi\/wp-json\/wp\/v2\/media?parent=1130"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-equipment.com\/vi\/wp-json\/wp\/v2\/product_brand?post=1130"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-equipment.com\/vi\/wp-json\/wp\/v2\/product_cat?post=1130"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-equipment.com\/vi\/wp-json\/wp\/v2\/product_tag?post=1130"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}