{"id":1556,"date":"2026-08-21T02:37:12","date_gmt":"2026-08-21T02:37:12","guid":{"rendered":"https:\/\/isbm-equipment.com\/?post_type=product&p=1556"},"modified":"2026-08-21T03:10:44","modified_gmt":"2026-08-21T03:10:44","slug":"edible-oil-bottle-handle-bottle-series-blow-molding-machine","status":"publish","type":"product","link":"https:\/\/isbm-equipment.com\/ko\/product\/edible-oil-bottle-handle-bottle-series-blow-molding-machine\/","title":{"rendered":"Edible Oil Bottle, Handle Bottle Series Blow Molding Machine"},"content":{"rendered":"
\n
\n
\n
Two-Step Blow Moulding Technology<\/div>\n

Edible Oil Bottle & Handle Bottle Series
\nTwo-Step Blow Moulding Machine<\/span><\/h1>\n

Precision-engineered for the edible oil and condiment packaging industry, the Edible Oil Bottle & Handle Bottle Series blow moulding machine delivers consistent, high-capacity production of front-handle, rear-handle, and large-volume oil containers ranging from 1.5 L up to 20 L. Designed with centralised heating and distributed blowing technology \u2014 a standout configuration that cuts energy consumption and maximises throughput across every shift.<\/p>\n

\ud83d\udce7 Request a Quote<\/a><\/p>\n<\/div>\n<\/div>\n

\n
Get a Quote \u2014 sales@isbm-equipment.com<\/a><\/div>\n<\/div>\n
\n
Product Overview<\/div>\n

Built for High-Volume Edible Oil Bottle Production in the UK & Europe<\/h2>\n
\n

\"EdibleThe Edible Oil Bottle & Handle Bottle Series is a purpose-built two-step blow moulding machine line developed specifically for the edible oil and condiment packaging market. Unlike single-stage injection blow moulding systems, this two-step (reheat stretch blow moulding) process separates preform production from the blowing stage \u2014 allowing greater flexibility, higher output speeds, and superior bottle consistency when running large-capacity PET containers.<\/p>\n

The machine series is engineered to handle front-positioned and rear-positioned handle bottles, as well as plain oil bottles in capacities of 5 L, 10 L, and 20 L. A key engineering highlight is the centralised heating with distributed blowing design \u2014 the preforms are uniformly heated in a single zone before being individually blown at distributed stations. This configuration dramatically reduces thermal inconsistencies across cavities, resulting in a more uniform wall distribution and a significantly lower reject rate compared to conventional blow moulding approaches.<\/p>\n

UK and European food packaging converters benefit directly from this two-step blow moulding architecture because it aligns with FDA and EU food-contact compliance requirements for PET: the separation of preform manufacturing from the blowing cell means finished bottles remain closed to atmospheric contamination throughout the production cycle, a critical factor for edible oil and condiment safety standards increasingly mandated by UK retailers and supermarket chains.<\/p>\n<\/div>\n<\/div>\n

\n
Why Choose This Machine<\/div>\n

Core Advantages of the Two-Step Blow Moulding System<\/h2>\n
\n
\n
\u26a1<\/div>\n
Centralised Heating + Distributed Blowing<\/div>\n
Uniform preform conditioning across all cavities ensures consistent wall thickness, reducing material waste and scrap rates, and enabling longer uninterrupted production runs.<\/div>\n<\/div>\n
\n
\ud83d\udca7<\/div>\n
Handle Bottle Compatibility (Front & Rear)<\/div>\n
The mould tooling system accommodates both front-positioned and rear-positioned integrated handles \u2014 a critical feature for bulk edible oil containers sold through UK supermarket and wholesale channels.<\/div>\n<\/div>\n
\n
\ud83c\udfed<\/div>\n
Large-Volume Output Up to 20 L<\/div>\n
Designed to produce containers from 1,500 ml to 22,000 ml within the same machine family. The HGA.J-2C366(20L) model handles 20 L oil drums at 700 bph theoretical output \u2014 rare capability in the UK blow moulding market.<\/div>\n<\/div>\n
\n
\ud83d\udcc8<\/div>\n
Lower Production Cost Per Bottle<\/div>\n
The two-step process optimises preform inventory flexibility: preforms can be produced or sourced separately, reducing downtime between mould changeovers and keeping per-unit production costs competitive for UK converters.<\/div>\n<\/div>\n
\n
\ud83d\udd27<\/div>\n
Customisation & Tooling Support<\/div>\n
Full mould design and manufacturing service available in-house. Custom neck finishes, handle profiles, label-panel geometries, and light-weighting programmes can all be integrated prior to delivery.<\/div>\n<\/div>\n
\n
\ud83d\udcfa<\/div>\n
PLC Control with HMI Touch Panel<\/div>\n
Full-process parameter monitoring, recipe storage, and alarm diagnostics via colour touch screen. Remote engineering support compatible with TeamViewer, reducing on-site maintenance requirements for UK operators.<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
Technology & Materials<\/div>\n

How the Two-Step Blow Moulding Process Works<\/h2>\n
\n
\n

\"EdibleIn a two-step blow moulding system, the manufacturing cycle is divided into two fully independent stages. During the first stage, PET preforms are manufactured using a separate injection moulding process. These preforms \u2014 which carry the finished bottle neck geometry and threading \u2014 are then cooled, inspected, and stored or transported to the blowing cell as required. This decoupled approach gives packaging manufacturers in the UK the freedom to source preforms from third-party suppliers or to run their own preform injection line at a different production rate, providing significant operational scheduling flexibility.<\/p>\n

During the second stage, preforms are loaded into the blow moulding machine, reheated in a centralised infrared oven to the precise orientation temperature of the PET material (typically 90\u2013120\u00b0C depending on resin grade and wall thickness), and then transferred to individual blow stations. At each station, a stretch rod extends axially to orientation-stretch the preform simultaneously as high-pressure air (26\u201335 kg\/cm2) inflates it against the mould cavity walls. The centralised heating zone across the series ensures that every preform reaches the same thermal profile before blowing \u2014 a critical quality factor when producing large-diameter, handle-integrated containers where uneven heating causes cosmetic and structural defects.<\/p>\n

The materials most commonly processed on this blow moulding machine series include food-grade PET (polyethylene terephthalate) resin meeting EU food-contact regulation (EU) No 10\/2011 and UK equivalent retained legislation. The resulting bottles exhibit excellent clarity, high oxygen barrier performance, good chemical resistance to edible oils and condiment acids, and the structural rigidity needed to withstand pallet-stacking loads during distribution through UK retail supply chains.<\/p>\n<\/div>\n

\n
\n
PRIMARY MATERIAL<\/div>\n
Food-Grade PET<\/div>\n
EU & UK food-contact compliant<\/div>\n<\/div>\n
\n
PROCESS TYPE<\/div>\n
Two-Step ISBM<\/div>\n
Decoupled preform & blowing stages<\/div>\n<\/div>\n
\n
CONTAINER APPLICATIONS<\/div>\n
Edible oil bottles (1.5 L \u2013 20 L)
\nHandle bottles (front & rear)
\nCondiment containers
\nCooking wine & sauce bottles<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
Technical Specifications<\/div>\n

Full Parameter Table \u2014 Edible Oil Bottle & Handle Bottle Series<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Category<\/th>\nParameter<\/th>\nUnit<\/th>\nHGA.ES-2C130<\/th>\nHGA.ES-2C150<\/th>\nHGA.ES-2C200<\/th>\nHGA.FS-2C200(5L)<\/th>\nHGA.JS-2CB152<\/th>\nHGA.JS-2C200<\/th>\nHGA.J-2C366(20L)<\/th>\n<\/tr>\n<\/thead>\n
Molding<\/td>\nClamping stroke<\/td>\nmm<\/td>\n160<\/td>\n190<\/td>\n215<\/td>\n225<\/td>\n190<\/td>\n225<\/td>\n332<\/td>\n<\/tr>\n
Mold-open distance<\/td>\nmm<\/td>\n360<\/td>\n440<\/td>\n499<\/td>\n509<\/td>\n440<\/td>\n509<\/td>\n772<\/td>\n<\/tr>\n
Mold-close distance<\/td>\nmm<\/td>\n200<\/td>\n250<\/td>\n284<\/td>\n284<\/td>\n250<\/td>\n284<\/td>\n440<\/td>\n<\/tr>\n
Stretching stroke<\/td>\nmm<\/td>\n350<\/td>\n450<\/td>\n500<\/td>\n500<\/td>\n450<\/td>\n450<\/td>\n620<\/td>\n<\/tr>\n
Mold-open distance (bottom)<\/td>\nmm<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n50<\/td>\n75<\/td>\n<\/tr>\n
Preform Holder<\/td>\n\u2014<\/td>\n60<\/td>\n60<\/td>\n50<\/td>\n76<\/td>\nBlow: 10 + Heat: 128<\/td>\nBlow: 8 + Heat: 128<\/td>\n116<\/td>\n<\/tr>\n
Cavities<\/td>\n\u2014<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n2<\/td>\n<\/tr>\n
Container<\/td>\nMax. Container Volume<\/td>\nml<\/td>\n1500<\/td>\n2500<\/td>\n5000<\/td>\n5000<\/td>\n3000<\/td>\n5000<\/td>\n22000<\/td>\n<\/tr>\n
Neck Diameter Range<\/td>\nmm<\/td>\n98<\/td>\n110<\/td>\n138<\/td>\n50<\/td>\n46<\/td>\n58<\/td>\n90<\/td>\n<\/tr>\n
Max. Container Diameter<\/td>\nmm<\/td>\n110<\/td>\n130<\/td>\n180<\/td>\n180<\/td>\n140<\/td>\n180<\/td>\n300<\/td>\n<\/tr>\n
Max. Container Height<\/td>\nmm<\/td>\n250<\/td>\n250<\/td>\n350<\/td>\n330<\/td>\n330<\/td>\n340<\/td>\n480<\/td>\n<\/tr>\n
Theoretical Output<\/td>\nbph<\/td>\n1800<\/td>\n1800<\/td>\n1600<\/td>\n1200<\/td>\n1600<\/td>\n1000<\/td>\n700<\/td>\n<\/tr>\n
Electrical System<\/td>\nMax. Heating Power<\/td>\nkW<\/td>\n42.5<\/td>\n42.5<\/td>\n85<\/td>\n72<\/td>\n48<\/td>\n65<\/td>\n86<\/td>\n<\/tr>\n
Heating Power<\/td>\nkW<\/td>\n8\u201313<\/td>\n18<\/td>\n35<\/td>\n24<\/td>\n12<\/td>\n26<\/td>\n45<\/td>\n<\/tr>\n
Air System<\/td>\nOperating Pressure<\/td>\nkg\/cm2<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n7<\/td>\n<\/tr>\n
Low Pressure Air Consumption<\/td>\nltr\/min<\/td>\n600<\/td>\n600<\/td>\n600<\/td>\n2000<\/td>\n1000<\/td>\n1600<\/td>\n4000<\/td>\n<\/tr>\n
Blowing Pressure<\/td>\nkg\/cm2<\/td>\n26\u201335<\/td>\n26\u201335<\/td>\n30<\/td>\n35<\/td>\n35<\/td>\n35<\/td>\n35<\/td>\n<\/tr>\n
High Pressure Air Consumption<\/td>\nltr\/min<\/td>\n1000\u20131500<\/td>\n1000\u20131500<\/td>\n6000<\/td>\n3600<\/td>\n2800<\/td>\n5000<\/td>\n12500<\/td>\n<\/tr>\n
Cooling Water<\/td>\nOperating Pressure<\/td>\nkg\/cm2<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n5\u20136<\/td>\n<\/tr>\n
Temperature Range<\/td>\n\u00b0C<\/td>\n8\u201310<\/td>\n8\u201310<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n8\u201312<\/td>\n<\/tr>\n
Flow Rate<\/td>\nltr\/min<\/td>\n30<\/td>\n30<\/td>\n91.4<\/td>\n60<\/td>\n30<\/td>\n30<\/td>\n120<\/td>\n<\/tr>\n
Machine<\/td>\nSize (L x W x H)<\/td>\nmm<\/td>\n3600x1800x1980<\/td>\n4290x1800x2220<\/td>\n4300x2100x2500<\/td>\n3450x2150x2290<\/td>\n4200x2100x2260<\/td>\n4100\/4450×2150\/2750×2350<\/td>\n4090x2660x3040<\/td>\n<\/tr>\n
Weight<\/td>\nkg<\/td>\n3000<\/td>\n3500<\/td>\n4500<\/td>\n3500<\/td>\n3000<\/td>\n2500<\/td>\n7000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
\n
Manufacturing & Customisation<\/div>\n

In-House Engineering. Full Customisation Capability.<\/h2>\n
\n
\n

Our manufacturing facility operates a full-loop customisation workflow, from initial product concept and bottle design through mould engineering, tooling manufacture, machine assembly, and factory acceptance testing. Every blow moulding machine in the Edible Oil Bottle & Handle Bottle Series can be configured against a customer’s specific bottle geometry \u2014 whether that involves a unique handle profile, a custom neck finish for a proprietary closure system, or a label-panel geometry tuned to a specific shrink-sleeve or pressure-sensitive label format.<\/p>\n

For UK food and beverage packaging manufacturers, this end-to-end customisation service eliminates the typical lead-time risk associated with sourcing moulds and machines from separate suppliers. Our engineering team works alongside your product development and quality teams during the design phase, using 3D mould simulation and bottle structural analysis to validate each design before a single piece of steel is cut. This significantly reduces iterative tooling changes after delivery and shortens the time to first validated production batch.<\/p>\n<\/div>\n

\n
\n
\u2713 Custom Mould Design & Manufacture<\/div>\n
Proprietary bottle geometries, handle profiles, and label-panel layouts fully supported.<\/div>\n<\/div>\n
\n
\u2713 Preform Design Consultation<\/div>\n
Technical support for preform specification to ensure optimal material distribution in the finished bottle.<\/div>\n<\/div>\n
\n
\u2713 Factory Acceptance Testing (FAT)<\/div>\n
Full production trial with customer-specified preforms before machine shipment to UK or EU site.<\/div>\n<\/div>\n
\n
\u2713 On-Site Commissioning Support<\/div>\n
Engineering technicians available for UK site installation, operator training, and process optimisation.<\/div>\n<\/div>\n<\/div>\n<\/div>\n
Get a Quote \u2014 sales@isbm-equipment.com<\/a><\/div>\n<\/div>\n
\n
Customer Success<\/div>\n

How a UK Cooking Oil Manufacturer Cut Packaging Costs by 22%<\/h2>\n
\n
\n
\n
Client Profile<\/div>\n
Industry:<\/strong> Edible Oil & Condiment Packaging
\nLocation:<\/strong> Birmingham, West Midlands, UK
\nMachine Installed:<\/strong> HGA.ES-2C200
\nContainer Type:<\/strong> 5 L handle bottle (rear-positioned grip)<\/div>\n<\/div>\n
\n
Challenge & Solution<\/div>\n
The client had been importing finished 5 L PET oil bottles from a European supplier, with rising freight costs and minimum order quantities creating cash flow pressure. They needed to bring blow moulding in-house to serve UK supermarket contracts more responsively.<\/div>\n<\/div>\n<\/div>\n

After evaluating several blow moulding suppliers, the Birmingham-based converter selected the HGA.ES-2C200 from our two-step range on the basis of its ability to produce their specific rear-handle 5 L bottle geometry \u2014 something that standard EBM extrusion blow moulding machines cannot achieve with the same clarity and material efficiency. The centralised heating architecture was a deciding factor: the process engineer cited consistent wall distribution across the handle section as the primary quality requirement, since the original imported bottles had experienced inconsistent handle thickness that led to returns from one major UK retailer.<\/p>\n

Following installation and a 6-week process qualification period, the line achieved a 22% reduction in per-unit packaging cost compared to the imported bottle programme, and the reject rate dropped to under 0.4%. The client subsequently ordered a second HGA.JS-2C200 unit 14 months later to expand capacity ahead of a private-label contract with a major British supermarket chain.<\/p>\n

\"Edible<\/p>\n<\/div>\n

\n
\n
\u275d<\/div>\n

The handle bottle quality is genuinely better than what we were importing. The wall thickness around the grip area is consistent shift after shift, which is exactly what our retail buyer was demanding. We have had zero handle-related complaints since installation.<\/p>\n

\u2014 Operations Director<\/div>\n
Cooking Oil Converter, Birmingham, UK<\/div>\n<\/div>\n
\n
\u275d<\/div>\n

We produce 10 L and 20 L containers for the foodservice wholesale market in Germany and the Netherlands. The HGA.J-2C366 handles both sizes with a mould change of under 45 minutes, which keeps our changeover costs manageable. The after-sales technical support has been responsive and knowledgeable.<\/p>\n

\u2014 Production Manager<\/div>\n
Industrial Food Packaging Group, Hamburg, Germany<\/div>\n<\/div>\n
\n
\u275d<\/div>\n

The two-step process gave us the flexibility to switch preform suppliers without retooling the machine. That was critical for us during a period when resin supply was constrained. The blow moulding machine itself has run with no unplanned downtime over our first 18 months of operation.<\/p>\n

\u2014 Supply Chain Director<\/div>\n
Edible Oil Bottler, Manchester, UK<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n
Related Equipment<\/div>\n

Injection Blow Moulding Machine Replacements<\/h2>\n

For facilities currently running older injection blow moulding (IBM) equipment, we supply purpose-built replacement machines that integrate directly into existing production cells without requiring tooling changes. If you are upgrading ageing IBM lines or replacing end-of-life machines from other manufacturers, the following models are engineered as direct-fit alternatives:<\/p>\n

\n
IBM Replacement<\/div>\n
Replacement of SUMA 65iB Injection Blow Molding Machine \u2014 ZQ60<\/div>\n
A direct engineering replacement for the SUMA 65iB IBM platform. The ZQ60 maintains identical mounting footprint and tooling compatibility, making it the practical choice for UK plants looking to extend the productive life of their existing SUMA mould inventory.<\/div>\n
View Product \u2192<\/div>\n

 <\/p>\n

IBM Replacement<\/div>\n
Replacement of Bloma IBM50 \u2014 ZQ60 Injection Blow Molding Machine<\/div>\n
Engineered as a precise replacement for the Bloma IBM50, the ZQ60 allows facilities to retire their existing Bloma machine while retaining their validated mould tooling and neck-finish tooling \u2014 minimising the qualification burden on UK food packaging production lines operating under BRC and FSSC22000 audit regimes.<\/div>\n
View Product \u2192<\/div>\n

 <\/p>\n<\/div>\n<\/div>\n

\n
Frequently Asked Questions<\/div>\n

Common Questions from UK Packaging Buyers<\/h2>\n
\n
\n
What is the typical lead time and cost of a two-step blow moulding machine for edible oil bottle production in the UK?<\/div>\n
\n
Lead time for a standard configured machine from our Edible Oil Bottle & Handle Bottle Series is typically 60\u201390 days from order confirmation to factory acceptance testing. Custom mould tooling, if required, adds 25\u201335 days to this schedule depending on the complexity of the bottle geometry. For pricing, we provide formal quotations based on your bottle specification, required cavities, and output target \u2014 please contact us at sales@isbm-equipment.com<\/a> for a detailed quote tailored to your production requirements in the UK.<\/div>\n<\/div>\n<\/div>\n
\n
How does a two-step blow moulding machine differ from a single-stage injection blow moulding machine for producing 5 litre edible oil bottles?<\/div>\n
\n
In a two-step system, preform production and the blowing stage are fully decoupled. This allows you to run the blowing machine at higher speeds independently of preform injection rate, use third-party preforms, and switch between bottle sizes simply by changing moulds rather than the entire machine configuration. For 5 L edible oil bottles specifically, the two-step process delivers better material orientation, more uniform wall distribution through the handle section, and clearer PET surface finish compared to a single-stage machine. The flexibility to preform independently also makes two-step the preferred approach for UK packaging converters running multiple SKUs across different shift patterns.<\/div>\n<\/div>\n<\/div>\n
\n
Which blow moulding machine model should I choose if I need to produce both 10 litre and 20 litre cooking oil containers for UK foodservice distribution?<\/div>\n
\n
For dual-capacity production of 10 L and 20 L containers in a UK foodservice context, the HGA.J-2C366(20L) is the appropriate model. It supports a maximum container volume of 22,000 ml, a maximum container diameter of 300 mm, and a maximum container height of 480 mm \u2014 specifications that comfortably accommodate both standard 10 L and 20 L cooking oil container geometries. Theoretical output is 700 bottles per hour at 20 L. Mould changeovers between the two sizes typically take under 45 minutes with a trained two-person crew, making it practical to run both sizes across a standard production week without dedicating separate machine assets to each.<\/div>\n<\/div>\n<\/div>\n
\n
Where can I get a price quote for an edible oil handle bottle blow moulding machine supplier in the UK, and what information should I prepare before making an enquiry?<\/div>\n
\n
You can request a quote directly at sales@isbm-equipment.com<\/a>. To receive an accurate quotation, it helps to have the following ready: your target bottle volume or range (e.g., 5 L, 10 L, 20 L), whether the bottle requires a handle and its position (front or rear), your required output in bottles per hour, your available utility supply specifications (air pressure and flow, cooling water temperature, electrical supply standard), and whether you require custom mould tooling or plan to supply your own preforms. The more detail you provide, the more precisely our engineering team can match a machine model and configuration to your UK production environment.<\/div>\n<\/div>\n<\/div>\n
\n
What compressed air supply specification do I need to install a large-volume edible oil bottle blow moulding machine at my UK manufacturing site?<\/div>\n
\n
The machines in this series operate on a two-pressure air system. Low-pressure air (operating at 7 kg\/cm2) handles transfer, pre-blow, and auxiliary functions \u2014 consumption ranges from 600 ltr\/min on smaller models up to 4,000 ltr\/min for the 20 L machine. High-pressure blowing air operates at 26\u201335 kg\/cm2 depending on the model, with high-pressure consumption ranging from 1,000 ltr\/min on entry models up to 12,500 ltr\/min on the HGA.J-2C366. UK sites typically supply high-pressure air from a dedicated oil-free high-pressure compressor unit. We recommend sizing the compressor to 120% of the machine’s rated high-pressure consumption to allow for pressure line losses and future capacity headroom. Contact us for a utilities specification sheet tailored to your chosen model.<\/div>\n<\/div>\n<\/div>\n
\n
When is the right time for a UK edible oil packaging plant to switch from buying imported PET bottles to running in-house blow moulding production?<\/div>\n
\n
The break-even threshold for bringing blow moulding in-house varies by volume and bottle complexity, but as a general benchmark, UK operations consuming more than 500,000 units per year of a single bottle size typically achieve payback within 18\u201324 months when accounting for machine depreciation, utilities, and labour. Plants processing 5 L or larger oil containers see faster payback because the cost premium on imported large-volume PET containers is proportionally higher than on smaller formats. Additional triggers include retail buyers imposing UK-origin packaging requirements, supply chain disruptions from European bottle suppliers, or a need to move to rPET (recycled PET) content that your current supplier cannot guarantee. Our team can run a comparative cost analysis for your specific scenario \u2014 reach us at sales@isbm-equipment.com<\/a>.<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
\n

Ready to Discuss Your Edible Oil Bottle Production Requirements?<\/h2>\n

Our engineering team works with UK and European food packaging manufacturers to specify, configure, and commission the right two-step blow moulding machine for your production environment. Contact us for a no-obligation technical discussion and quotation.<\/p>\n

\ud83d\udce7 Get a Quote \u2014 sales@isbm-equipment.com<\/a><\/p>\n<\/div>\n<\/div>\n

edit by gzl<\/p>","protected":false},"excerpt":{"rendered":"

Two-step blow moulding machine for edible oil & handle bottles (1.5\u201320 L). Centralised heating, distributed blowing. PET. UK food-grade compliant. 700\u20131,800 bph. Get a quote.<\/p>","protected":false},"featured_media":1557,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[18],"product_tag":[],"class_list":["post-1556","product","type-product","status-publish","has-post-thumbnail","product_cat-isbm-machine","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbm-equipment.com\/ko\/wp-json\/wp\/v2\/product\/1556","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbm-equipment.com\/ko\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbm-equipment.com\/ko\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbm-equipment.com\/ko\/wp-json\/wp\/v2\/media\/1557"}],"wp:attachment":[{"href":"https:\/\/isbm-equipment.com\/ko\/wp-json\/wp\/v2\/media?parent=1556"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbm-equipment.com\/ko\/wp-json\/wp\/v2\/product_brand?post=1556"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbm-equipment.com\/ko\/wp-json\/wp\/v2\/product_cat?post=1556"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbm-equipment.com\/ko\/wp-json\/wp\/v2\/product_tag?post=1556"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}